Spindle Assemblies John Deere Mowers 42″ Deck Gy20785

Replaces the John Deere model: gy20050, gy20785
Compatible with: John Deere plus l100-l130 and gx20250
Height: 6 3 / 20.3 cm overall, includes a grease fitting
Includes fixing bolts and self-tapping blade bolts
Replacing steps: 285-093

Oregon: 82-356

Rotary: 11206

Sunbelt: b1jd37

but I would like to add a user comment about it which may be useful later on. Please comment if you have any problems with john deere mower deck parts.

review:

 

This kit was incomplete in many ways and needed to be modified.
1. He did not come with the 2 blade bolts. I had to reuse my old ones.
2. To mount the spindle, pass the 4 bolts into the top of the bridge and screw them into the spindle. The holes in the spindle were not threaded so I had to tap the 4 holes in the spindle to mount it. The other thought was that maybe you could use nuts on the other side but that was not the case because the set was not big enough for the bolt to go through, so the holes should have been pre-threaded but were not.
3. The fixing bolts were too long. They came really close to the blade. So, once I bolted the pin on the bridge, I cut the bolts with a wheel.
Other than that, the pin worked and solved the problem. My old spindle bearings were fired.
I hope it helps you.

Leave a Reply

Your email address will not be published. Required fields are marked *